Shift knob wire routing
 

Hey guys, i have a 1995 polaris 300, just bought my first one. Rebuilt the motor, and put it all back together, but I can't seem to figure out the routing from the gear shift knob, to where it plugs in on the other side. I can't seem to find a diagram of the routing anywhere. Anybody have a diagram or knows how this wire goes? Thanks a bunch.

are you talking about the shifting linkage or the wires from the switch located in the shift assembly?

There's a set of 4 wires that come out of the shifter, and they look like they somehow route to the opposite side of the atv and into the main harness. If i had to guess I'd say those wires power the lights that let you know what gear it's in? Should i include a picture?

correct that is the switch harness that does tell which gear it is in. I would guess the override and awd(if it is one) might be effect if its not hooked up as well. with out looking I could not tell where it hooks in the main harness, but I would think it should be there handy unless it has been messed with.

Sorry for the long reply, been a crazy week. Lol. Yeah the wire comes out of the shifter assembly, there's 4 wires. Purple solid, green/white, grey/white, red/white. I think i have the wire routed correctly now, but I'm having a lot of trouble funding the wiring diagram/schematic. The awd is working, but the neutral safety isn't, I'm guessing because the wiring isn't hooked up correctly.
https://cimg0.ibsrv.net/gimg/atvconn...b40265da70.jpg