ATVConnection.com ATV Enthusiast Community - Search Results

 
Search: Posts Made By: stendori
Showing results 1 to 25 of 496
Search took 0.14 seconds.
Forum: Polaris
Yesterday, 03:36 PM
Replies: 2
Views: 96
Posted By stendori

usually a non working awd in the newer bikes such...

usually a non working awd in the newer bikes such as yours is a broken roller cage in the front end.
Forum: Polaris
01-16-2019, 05:06 PM
Replies: 7
Views: 133
Posted By stendori

we used to so that years ago to save money on the...

we used to so that years ago to save money on the snowmobiles and it worked fairly well.
Forum: Polaris
01-16-2019, 01:30 PM
Replies: 7
Views: 133
Posted By stendori

never mind I found it and here are part numbers...

never mind I found it and here are part numbers and hope this what you need.
3280219 ADAPTER,DRIVE
3280217 KEY,SPEEDO.DRIVE
3280164SEAL,ANGLE DRIVE1



5020741BUSHING,SPEEDO.DRIVE
Forum: Polaris
01-16-2019, 01:24 PM
Replies: 7
Views: 133
Posted By stendori

where does the angle drive bolt into the...

where does the angle drive bolt into the transmission area or somewhere else so I can try to find a part number for you. been too long since ive seen one
Forum: Polaris
01-16-2019, 01:17 PM
Replies: 3
Views: 110
Posted By stendori

check wheel bearings as well but assuming you...

check wheel bearings as well but assuming you would have noticed a bad bearing when you did the other work. as mentioned put on stands carefully and let the tires turn to watch. bad wobe will knocked...
Forum: Polaris
01-12-2019, 10:32 AM
Replies: 7
Views: 342
Posted By stendori

the belts are designed to last a long time as...

the belts are designed to last a long time as long as they are not abused. most of the time you would go by the MFG recommendations on time of replacement or if he feels like it is slipping. I have...
Forum: Polaris
01-09-2019, 02:50 PM
Replies: 1
Views: 116
Posted By stendori

that's because the newer models went to a control...

that's because the newer models went to a control module that does more then just acts as a regulator of voltage.
Forum: Polaris
01-06-2019, 07:29 AM
Replies: 2
Views: 132
Posted By stendori

is the fuel pump working, getting vacuum letting...

is the fuel pump working, getting vacuum letting fuel through.
Forum: Polaris
01-04-2019, 03:29 PM
Replies: 3
Views: 184
Posted By stendori

you can try the propane torch, but I would be...

you can try the propane torch, but I would be surprised if it comes out with out using an acetylene/oxygen torch, but good luck.
Forum: Polaris
01-04-2019, 03:26 PM
Replies: 3
Views: 190
Posted By stendori

assuming the weights are in good shape and the...

assuming the weights are in good shape and the pins aren't bad and have free movement you just switch them out. however since you need a clutch puller (ie it's a long threaded bolt) to pull off your...
Forum: Polaris
01-02-2019, 03:41 PM
Replies: 5
Views: 211
Posted By stendori

yep that would do it for sure lol hope that...

yep that would do it for sure lol hope that straightens it out for ya. nasty stuff for sure.
Forum: Polaris
01-01-2019, 08:36 AM
Replies: 5
Views: 211
Posted By stendori

do the basics first and check the throttle etc...

do the basics first and check the throttle etc to make sure there is an 1/8" gap to prevent the cut out from activating which make the cut out.
Forum: Polaris
01-01-2019, 08:33 AM
Replies: 4
Views: 130
Posted By stendori

ok I re looked at the video closer and I see the...

ok I re looked at the video closer and I see the wire harness now sorry didn't pay attention the first time. if that harness is coming from the stator(crank case) then it might be the main crank seal...
Forum: Polaris
01-01-2019, 08:29 AM
Replies: 3
Views: 184
Posted By stendori

I sanded mine down real good and used a baroque...

I sanded mine down real good and used a baroque black paint so it would hold better. I would guess you would need a good torch set(with oxygen) to get the bolts hot enough to take the shield off. you...
Forum: Polaris
12-30-2018, 07:37 AM
Replies: 1
Views: 117
Posted By stendori

assuming the ring gaps are not lined up on the...

assuming the ring gaps are not lined up on the piston?
Forum: Polaris
12-30-2018, 07:35 AM
Replies: 4
Views: 130
Posted By stendori

is that the oil injection line form the oil pump?...

is that the oil injection line form the oil pump? it should be providing oil when the throttle is pushed where that is a 2 stroke bike.
Forum: Polaris
12-26-2018, 03:39 PM
Replies: 2
Views: 171
Posted By stendori

the voltage regulator is now called the control...

the voltage regulator is now called the control module 4011568Control, Module
this is from the Polaris parts list for that year bike
Forum: Polaris
12-23-2018, 08:30 AM
Replies: 1
Views: 120
Posted By stendori

I believe it's vacuumed controlled. are you sure...

I believe it's vacuumed controlled. are you sure the float is allowing enough gas in?
Forum: Polaris
12-23-2018, 08:27 AM
Replies: 3
Views: 152
Posted By stendori

you might have a broken roller cage in the front...

you might have a broken roller cage in the front gear case which stops the awd from engaging thos happens a lot to the newer Polaris models when the awd is turned on while the rear tires are spinning.
Forum: Polaris
12-23-2018, 08:25 AM
Replies: 4
Views: 185
Posted By stendori

you might have a broken roller cage in the front...

you might have a broken roller cage in the front gear case which stops the awd from engaging thos happens a lot to the newer Polaris models when the awd is turned on while the rear tires are...
Forum: Polaris
12-10-2018, 03:14 PM
Replies: 2
Views: 154
Posted By stendori

seems like excessive play meaning bearing in case...

seems like excessive play meaning bearing in case is bad??
Forum: Polaris
12-10-2018, 03:12 PM
Replies: 2
Views: 150
Posted By stendori

check the voltage with a meter to rule out too...

check the voltage with a meter to rule out too much power. I think it would be more like a 15 amp fuse for the fan.
Forum: Polaris
12-10-2018, 03:09 PM
Replies: 2
Views: 167
Posted By stendori

guessing since neither front wheel is spinning...

guessing since neither front wheel is spinning that broke something in the front gear case, good time to take apart the hubs anyways to clean and service them to make it's not in the nub area.
Forum: Polaris
12-08-2018, 05:17 AM
Replies: 6
Views: 209
Posted By stendori

did you set the float? are the correct size jets...

did you set the float? are the correct size jets in the new carb you installed? is the needle clip set to the correct position? just a few issues that might be. just start with making sur the float...
Forum: Polaris
12-01-2018, 05:22 PM
Replies: 3
Views: 190
Posted By stendori

are you sure that the fuel pump is pulling fuel...

are you sure that the fuel pump is pulling fuel to the carb, float is set correctly. the cable should have a little slack like 1/8" when its choke is closed.
Showing results 1 to 25 of 496
 


 
Forum Jump

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

© 2018 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.