250x/300ex bent frame HELP!!
 

the 250x's frame is slightly bent right next to the airbox on the left side (from drivers seat) it is the bar that is slanted like this ......... / sorta lol that comes from the grab bar to the bottom it slightly curves outward it dosent effect driveing just when im at a dead stop and turn the wheel all the way to the right it moves the bike to the side!

how can i fix this? do i need 2?

250x/300ex bent frame HELP!!
 

hey dude, just look around on ebay, i've seen frames as low as 100$ on ebay, if it's just tweaked a bit you might be able to tweak it back but i'd say maybe cut out n weld i some new sections of tubing if it's bent really good, but it may be easier to just get a frame off ebay or a quad salvage company, lates.... josh.........

250x/300ex bent frame HELP!!
 

NO ONE ELSE HAS ANY COMMENTS?

250x/300ex bent frame HELP!!
 

i think my 250x frame is bent in the same place...i never payed attention to it never affected anything

250x/300ex bent frame HELP!!
 

KFX440 where do u live?

250x/300ex bent frame HELP!!
 

Hmm, is it the frame or the subframe? I cannot remember if the 250x/300ex has a solid frame, or if it has a frame/sub.

250x/300ex bent frame HELP!!
 

i feel dumb but what excatly is a sub frame? um all i know is that it is a frame with 2 A arms connected and rear swingarm

250x/300ex bent frame HELP!!
 

reeders pennsylvania

250x/300ex bent frame HELP!!
 

Well the frame is what holds yes the a-arms and swinger to, the sub-frame is usually what the exhaust, grab bar, and rear fenders all bolt onto.