91'lt250r rear axle nut??
 

Hey, I just bought new axle bearnings for my lt, and I cant seem to get the inner axle nut off on the sprocket side, and in my book it says if u cant get it off then chisle it off, and I dont really want to do that, just wondering if anyone has had the same problem,and what should i do to break it loose, heat, special oils,ect, any info would be very thankfull.

91'lt250r rear axle nut??
 

Use a big pipe wrench, cheater bar, and have a buddy hold the quad down, it'll come off. Soaking with penetrating oil over a couple days might help. Heating it probably wouldn't hurt either since your putting new seals in with your bearings. I've always used a pipe wrench though.

91'lt250r rear axle nut??
 

i agree, pipe wrench and torch it. u probably don't want to spend money, but magic racing sells billet locking nuts for the lt250r pretty cheap. u need 2 though.

91'lt250r rear axle nut??
 

I've always heard that you can't use heat because you'll weaken the heat treatment of the axle. If you use anti-sieze and then cover the nut with electical tape when you reassemble it, you won't have this problem again.

91'lt250r rear axle nut??
 

Well bad news, I sprayed it with pb blaster and let it sit for a couple days, then tried a pipe wrench, but i had nobody to hold it down for me so i supidly put a big wrench between the rear sprocket and the swing arm and broke it right on top where i had it welded last year, and the nut still isnt off so the only thing i can think to do now is buy a whole new set up,swingarm,axle,and bearning carrier, any one know where i could get them,brand new it will be 1700 for everything, wanted to get used ones, I live on the border of maine and new hampshire at the southern most part of maine,any info would be great, Thanks

91'lt250r rear axle nut??
 

EBAY

91'lt250r rear axle nut??
 

ive got an 88 im gonna part out. good axle and swingarm. let me know