ltz400 only idles
lets beat a dead horse...but have not found the fix!
yes i have fuel yes i cleaned the carb yes i have spark with a new plug yes the float is working yes the brake has been bypassed yes all the hoses are connected yes the airfilter is good and clean yes its fresh fuel i dont understand...i ran it with fresh fuel..idles fine...will rev up fine and rode fine...put it back into a heated pole barn and now will start fine but wont rev up at all no matter what i do...and i have searched for an answer and im at a loss any help would be great thanks! |
Sounds like its getting flooded ik you cleaned the carb but make sure the float needle is doing its job!
|
Originally Posted by Drewberger88
(Post 3414793)
Sounds like its getting flooded ik you cleaned the carb but make sure the float needle is doing its job!
|
Not knowing the year model, is the petcock set to on or prime? Throttle cable looks to be working ok?
|
Originally Posted by scootergptx
(Post 3414835)
Not knowing the year model, is the petcock set to on or prime? Throttle cable looks to be working ok?
2003 ltz400 i think the ignition is cutting out but not sure why |
All times are GMT -5. The time now is 08:00 PM. |
© 2024 MH Sub I, LLC dba Internet Brands