How much to have a cylinder bored?
hey can you guys tell me about how much it will cost to have one cylinder bored out, and I will put it together myself. It would probaly be at my local atv dealer.
thanks |
How much to have a cylinder bored?
I had a trx 250r cylinder bored one over about three years ago for 50.00- it'll probably be somewhat similar in cost
|
How much to have a cylinder bored?
I just paid $60.00 to have a cylinder bored & honed. Reasonable for this area as not too many shops have the capability or expertise to handle small cylinders.
Denny |
How much to have a cylinder bored?
Dang in my area, it only cost $25 for mine to be bored. The other place I took my 400 cylinder one time charge me $30. And I thought that was hi considering I can get it done for $25. And plus I know the guy who does it, and is a former MX racer, so it makes it a little easier to trust his work. But I have to chamfer the ports myself, they don't do it.
|
How much to have a cylinder bored?
what is chamfering the ports?
|
How much to have a cylinder bored?
Originally posted by: 86LTR what is chamfering the ports? |
How much to have a cylinder bored?
well theres a machine shop near my house in kinglsey pa that bores cylinders at a starting rate of 25 dollars and it will go up a little bit if the cylinder is real hard to mount and his boring machine is accurate to within to a 10th of half a thousand of an inch
|
How much to have a cylinder bored?
i need to get my 4 stroke 230 bored 20 over will this run me the same being i do not have ports. just a plain sleeve?, and after it is bored .20 over should i bring the piston with me for the bore job?
|
How much to have a cylinder bored?
Yes, take the piston with you... they will actually bore to match the exact piston you are going to use.
Ride On. |
How much to have a cylinder bored?
Vinson, You still have ports that need to be deburred.*OPPS 4 cycles don't have ports* This should be done by the same person who bores it, I would think.
|
How much to have a cylinder bored?
i am confused, for a 2 stroke there are ports, intake and exhauset, and other expansion ports. on the 230 the sleeve is just one hunk of metal, straight, and no openings. thanks and please explain. and what the $
|
How much to have a cylinder bored?
Edit: I'm retarded. [img]i/expressions/face-icon-small-confused.gif[/img]
|
How much to have a cylinder bored?
the air gets in through the intake valve, and the exhaust exits through the exhaust valve. should i take a pic to show you what i mean. a pic on the sleeve?
|
How much to have a cylinder bored?
30 bucks here at my dads friends machine shops. hes one of the top machinists in the country
|
How much would it coat to bore a trx 250ex ?
Would anyone know how much it would cost me to bore a trx 250ex to a 310 ??
|
All times are GMT -5. The time now is 11:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands