Z 400 PIPES!
#2
#3
Z 400 PIPES!
Several of the recent magazines have run pipe shootouts. Keep in mind that they don't take the time to perfectly jet the machines, so the results are in the ballpark, but not exact. I run an FMF PowerBomb and Ti4 (the 17" AMA legal one). Nice increase on the low and mid end, where this motor needs the most help!! I ride with everything Banshees, Raptors, a DS, another Z, 400EX, and a Predator, and nobody is beating me, especially in the tight technical stuff (I do have better suspension than any of them).
#4
Z 400 PIPES!
Don't listen to any of the pipe shootouts in any mag. The last one I read had a CT and a Graydon both in the same shootout. CT and Graydon are both the same pipe. The Z, unfortunatly ,dosen't get a whole ton of power from a pipe. I went with a LRD. I have always like them, they sound good, look good, its ceramic coated (they have chrome too), had a little more bottom end power. I like the pipe alot. Just pick the brand you like, I tried alot of them out, not a lot of difference. I almost bought a DMC, whole sys. for $375. I tried it, its nice too. I liked that not everyone has a LRD. Good Luck, Let us know what one you get, your altitude, and I can help you with jetting.
#7
Trending Topics
#8
#9
Z 400 PIPES!
i have the hmf slip on but can not get the jetting wright. went to a 155 cut outs bad runns a little better with lid off but still cuts out so went to a dj jet 165 will not run with lid on runns good with it off. i ever tried going down to a 142.5 no good cuts out bad should i tri a 170? and go down from there? jetted this thing 4 time to day help?