Raptor owners with 39mm FCR's, please step inside
 

What are you guys using for intake manifolds, air filters, and throttle activation(thumb or twist)?

Raptor owners with 39mm FCR's, please step inside
 

I think Trinity, Robertson, and Craycraft all have manifolds. As far as throttles, I know Zombies bike has a thumb throttle, and I think RaptorRcR's is the same. For air filters, I think they are all running no airbox with dual filters.

Raptor owners with 39mm FCR's, please step inside
 

Are the intake manifolds different from the 35mm FCR's? How hard is the thumb throttle to pull with the dual FCR's? Are the air filters clamped directly to the carbs? Thank's.

Raptor owners with 39mm FCR's, please step inside
 

I am not sure if the intake manifolds are different from the 35mm to the 39mm or about the air filter.

However, I rode Zombie's bike and the throttle was not stiff or hard at all. I was very impressed.

Raptor owners with 39mm FCR's, please step inside
 

Is he using a stock or aftermarket thumb throttle?

Raptor owners with 39mm FCR's, please step inside
 

The 39mm fcr's use a different intake manifold. All of the FCR raptors i have seen have clamp-on air filters. The 39's are a little different than 35's for the set up. Give Bob Craycraft a call. 817 441 5893. If you go with 35's i would stick them in the factory boots. I do not like the angles of the trinity intake.

Raptor owners with 39mm FCR's, please step inside
 

just what 14 said

Raptor owners with 39mm FCR's, please step inside
 

TTT

Raptor owners with 39mm FCR's, please step inside
 

BUMP

Raptor owners with 39mm FCR's, please step inside
 

see raptoraz you dont need the 39's just buy my 35's!!!!