Who is running a 12:1 piston with a stage 1 cam and Porting?
#1
Who is running a 12:1 piston with a stage 1 cam and Porting?
wanted to know the diffrence i will pick up since i have an 11:1 right now,..
What would i have to change,i am trying to keep all the original stuuf stock like the rod,crank..I want to go to a bigger build in january but may need to change out pistons sooner..thanks for the help..
What would i have to change,i am trying to keep all the original stuuf stock like the rod,crank..I want to go to a bigger build in january but may need to change out pistons sooner..thanks for the help..
#4
Who is running a 12:1 piston with a stage 1 cam and Porting?
I have the 12:1 but I am using the stage 2. Looking to upgrade to the WEB 685 cam in Jan. I have gobbs of low end and torque, but want a little more on top.
LiquIdsaNd - we were not talking about weed-wackers, we are talking about big bore thumpers[img]i/expressions/face-icon-small-wink.gif[/img]
LiquIdsaNd - we were not talking about weed-wackers, we are talking about big bore thumpers[img]i/expressions/face-icon-small-wink.gif[/img]
#6
Who is running a 12:1 piston with a stage 1 cam and Porting?
You'll wont notice much difference at all especially with a stage1 cam that's already made for low end. The higher compression piston gives you more low end so you can run a high RPM cam and not notice too much the lose of bottom end. One more thing you'll need to allways run higher then 93 octane pump gas with a 12.1
#7
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
TegraQuad
1) Engine problems..
13
11-26-2017 01:40 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)