Anyone tried the new K&N Lid?
 

PIC

Anyone tried these yet?

Anyone tried the new K&N Lid?
 

Look at this lid for a Raptor!


K&N Raptor PowerLid

Anyone tried the new K&N Lid?
 

Ok, I see.

I was thinking that you completely removed the air filter and just used the lid. [img]i/expressions/face-icon-small-blush.gif[/img]

Anyone tried the new K&N Lid?
 

I was wondering if anyone has used this lid to. I just bought one and going through the jetting recommendations suprised me a little bit. I was suprised to see such a difference between the left and right carb jet 150/155 for left and 170/175 for the right and only moving the needle clip one position in the right carb only. And this was for stock motors. if anyone is using these let us know how you jetted your carbs.

Anyone tried the new K&N Lid?
 

I can't run any lid at all on mine. I drilled holes in the stock lid and put it on, and it was really restricting too much air. My Raptor will not run right with a lid. But the lid looks good if you get it jetted right, and ride in dusty conditions.

Aren't those lid's $100 or more???

Anyone tried the new K&N Lid?
 

yeah they are $100