Welding
#31
#33
Welding
Ive been welding for 20+ years mig , tig , stick , Spray arc , Vacuum chamber . Been there dont that . Take my advice . SPEND YOUR TIME LEARING SOMETHING THAT CAN MAKE YOU MONEY AND WONT BURN SHOCK OR GAS YOU . MAKE ENOUGH MONEY TO HAVE SOMEONE ELSE FIX YOUR TOYS .
Ok I'm dont preaching Mig is your best bet as stated before clean the area well . try a tri mix gas CO2, Helium , Argon) a little more money but it likes foreign metal better than co2 . if your welding tubing if at all possible purge the tube with inert gas while you weld it.
Stay away from flux core wire try to always use bottled gas . ,025 wire would probly work best for what your doing . If there is allready a weld try and remove as much of it as possible . then weld over that area .\
and Practice practice practice
Welding is as easy as falling off a 4 wheeler . But remembe if you want to look good falling off PRACTICE
Ok I'm dont preaching Mig is your best bet as stated before clean the area well . try a tri mix gas CO2, Helium , Argon) a little more money but it likes foreign metal better than co2 . if your welding tubing if at all possible purge the tube with inert gas while you weld it.
Stay away from flux core wire try to always use bottled gas . ,025 wire would probly work best for what your doing . If there is allready a weld try and remove as much of it as possible . then weld over that area .\
and Practice practice practice
Welding is as easy as falling off a 4 wheeler . But remembe if you want to look good falling off PRACTICE
Thread
Thread Starter
Forum
Replies
Last Post
greg86hd
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
09-16-2015 12:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)