300ft stock bore times...
#33
#35
300ft stock bore times...
I WILL see a 3.99 run on a Rappy SOME day!
Keep me updated on that stock bore, Mike. I have heard all the rumor's too, but since I'm working 6-7 days a week, I have zero time.
#36
#37
300ft stock bore times...
O3 Rappy Stock bore and stroke.
Craycraft porting
Stage 2 hot cam
11.5 :1 JE piston
Stock valves
Alba Race pipe
+6 swingarm
22" Cheng Shin knobbies
14 tooth primary
300 ft on a dirt track
My best times were 5.06 and a 5.10 at Camden Raceway in Camden Indiana
Im having a 686 piston put in along with some additional porting and over sized valves. I hope to shave .1 or .2 secs of my time and get her down into the 4's.
Craycraft porting
Stage 2 hot cam
11.5 :1 JE piston
Stock valves
Alba Race pipe
+6 swingarm
22" Cheng Shin knobbies
14 tooth primary
300 ft on a dirt track
My best times were 5.06 and a 5.10 at Camden Raceway in Camden Indiana
Im having a 686 piston put in along with some additional porting and over sized valves. I hope to shave .1 or .2 secs of my time and get her down into the 4's.
#38
300ft stock bore times...
I ran the "stock bore" bike this weekend. He is fast about a 5.0-5.1 bike. But he didn't have anything for the Drag-N... [img]i/expressions/face-icon-small-wink.gif[/img]
And Ken I would have to come to your garage to see you race... That CR has been in hiding all summer! LOL
Quadbart... I think this guy must be running around the same times you are. The sensor was messed up on one side and gave some VERY forgiving times... 4.8's but he is about a 5.0 bike at best.
I did see a 4.6 run on my bike finally and it was in the lane that was giving "true times". I also ran a 4.6 in the other lane but was running a 4.2 shee, and he beat me by about 3 quad lenghts... DAMN he is fast LOL
And Ken I would have to come to your garage to see you race... That CR has been in hiding all summer! LOL
Quadbart... I think this guy must be running around the same times you are. The sensor was messed up on one side and gave some VERY forgiving times... 4.8's but he is about a 5.0 bike at best.
I did see a 4.6 run on my bike finally and it was in the lane that was giving "true times". I also ran a 4.6 in the other lane but was running a 4.2 shee, and he beat me by about 3 quad lenghts... DAMN he is fast LOL
Thread
Thread Starter
Forum
Replies
Last Post
Quadzilla Heritage
Classifieds, Garage Sale & Swap Shop
0
09-25-2015 01:39 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)