Grizzly Seat Latch problems ???
#1
Grizzly Seat Latch problems ???
My grizzly seat will not latch. The plastic lift thing doesnt make contact with anything. I think its worn out or somthing cause I can not get it to latch at all. When Im getting it through rough trails the seat comes up and starts to come off and I have to stop and fix it. Has anyone had this problem with theirs? And is there an easy fix? and if not easy what can I do to fix this?
#3
#4
Grizzly Seat Latch problems ???
<div class="FTQUOTE"><begin quote>Originally posted by: west350bruin
Not sure which grizzly your having the problem with? Try putting a little more information in your posts and you will probably yield better results.
Ronnies has a pretty good parts microfiche. you can check there</end quote></div>
oh sorry. its a 2007 yamaha grizzly 700. The plastic clip on the bottom of the seat that latches seems to be possibly worn out or somthing and wont make contact to latch. It was like that when I got it. It doesnt even try to latch and I tried bending the plasic clip to make contact but it wont at all.
Not sure which grizzly your having the problem with? Try putting a little more information in your posts and you will probably yield better results.
Ronnies has a pretty good parts microfiche. you can check there</end quote></div>
oh sorry. its a 2007 yamaha grizzly 700. The plastic clip on the bottom of the seat that latches seems to be possibly worn out or somthing and wont make contact to latch. It was like that when I got it. It doesnt even try to latch and I tried bending the plasic clip to make contact but it wont at all.
#5
#6
#7
Grizzly Seat Latch problems ???
Did they notify you that was a problem when you bought it? Either way, if you just got this quad, I would demand they fix it for you. Its crap that they sold it to you like that. I would start looking for a new dealer... If they won't fix it for you free of charge, be sure to tell them that you'll be calling yamaha, and will also be recommending to everyone you meet not to go to that dealership.
Trending Topics
#9
Grizzly Seat Latch problems ???
I have a 08 Grizzly 700 and the seat is nice and tight. I do however need to "slap" the back of it pretty hard for it to set in and latch. If you had the seat aligned right and the latch worked, I would think sitting on it would latch it too.
The dealer should be happy to fix this for you, if they're decent.
The dealer should be happy to fix this for you, if they're decent.
#10
Grizzly Seat Latch problems ???
okay I found the problem myself. The plastic latch apears to be bent back so it doesnt go down far enough to latch. If I push down with my finger on it I can get it to but as soon as I let go it bends back and unlatches. I tried bending it back but it wont bend back and stay. Im thinking about mabey taking a heat gun and seeing if I can mabey take some heat to it and get it to stay bent back to where it should be.
Any suggestions?
Any suggestions?