Yamaha warrior won't start
 

I have 2 uesd starters and all they both will do is turn over <u>buttt</u> the engine won't catch or something i checked the wires and everything [img]i/expressions/face-icon-small-confused.gif[/img]

Yamaha warrior won't start
 

Having the same problem I was told to clean the carburetor out. I'm doing that tonight Friday at about 7:42. I'll Let you know how it goes. MIKE

Yamaha warrior won't start
 

does the engine turn over at all or does the starter just turn. if your starter is just turning and not turning the engine over then you either have a defective starter or a stripped/broken starter gear or broken crank shaft. i doubt it's the crank shaft it takes alot to break them.

Yamaha warrior won't start
 

it's 10:18 I just finished cleaning the carburetor as well as ALOT of other stuff and will see in the morning if it will start. I don't think that the carb was the problem but I was told that it was so.... Mine turns over and everything just won't "pop", when I used starting fluid last week it started, but lately it won't start with anything. If it doesn't start tomorrow I don't know what I'm going to do. what could it be.

Yamaha warrior won't start
 

ah.. i called some guy in johnstown pa, and he said that there is a key somewhere by the stator he said if i tseted both starters and it does it with both he said that the key probably shatored they are like 2 to 4$$$ idk im gonna look in tow it this week thanx

Yamaha warrior won't start
 

I put a aftermarket degree key from vitos in my 2000 warrior for a supposed perfrmance upgrade rode my bike for ten minutes and it shattered, I had your starting problem and had to put my stock degree key back in. This ten dollar part to advance my timing just caused me a lot of headache, I wouldn't recommend this upgrade. That may be your problem but I would check your spark b/f tearing into your engine.