warrior doesn't start unless pull started
 

Ok here is the deal was out ridin everything fine until I shut off ,then it wouldn't start.It is like the starter is not engaging,so I pull started (pop start) ran normal likme nuttin wrong so took it home pulled stator cover off starter is turning but not turning flywheel,think it is the starter clutch but not sure any help would be apprecviated and if it is the starter clutch is there a way to pull the flywheel off without buying the flywheel puller

warrior doesn't start unless pull started
 

well once you determine whether or not the starter is turning the engine or just spinning freely it would prolly be a starter clutch most likely, and its reccomended to buy the puller around 50 bucks i think, that way you dont mess anything up but you can take a hammer and something to pry with and pry on the flywheel and smack the head of the shaft it slides over and sometimes they pop off if you do it right, but be carefull

warrior doesn't start unless pull started
 

yeah it doesn't turn the engine over,I'll probably just get the puller tanks for the info

warrior doesn't start unless pull started
 

I loaded mine in the truck, took it to the dealership, and they removed my flywheel for $15 while it sat in the bed of my truck. I did of course have everything disassembled up to that point for them though.