Swingarm extension by JTM Products
#2
RW660,
What kind of FMF pipe do you have? Full system or silencer only? What size main and pilot jets did you end up using?
Just wondered.
I've got the FMF power C 4sq silencer with a modified airbox (stock filter, not for long) and am using 150/155 mains and 27.5 pilots. Plug looks good where I'm at 650'.
What kind of FMF pipe do you have? Full system or silencer only? What size main and pilot jets did you end up using?
Just wondered.
I've got the FMF power C 4sq silencer with a modified airbox (stock filter, not for long) and am using 150/155 mains and 27.5 pilots. Plug looks good where I'm at 650'.
#3
#4
I just had the silencer. I wanted the pipe but they kept jacking me around so I took their pipe off sent it back. I ordered a complete system from CT Racing. Pro Flo Design sytem made the biggest difference. I can tell that I need to change the jetting but I am going to wait until the other system comes.
#5
#7
Trending Topics
#8
I emailed them as well and here is what they said
We are currently working on a 5" extension. Hope to be testing it this
weekend.
To extend the hub back less than 5" would require cutting the extrusion on
the stock swingarm.
This is an option we are exploring, but it would get more costly - you would
have to machine an opening thru the rear. - would you consider this option?
(provided you saw design details, and the cost was right)
John
We are currently working on a 5" extension. Hope to be testing it this
weekend.
To extend the hub back less than 5" would require cutting the extrusion on
the stock swingarm.
This is an option we are exploring, but it would get more costly - you would
have to machine an opening thru the rear. - would you consider this option?
(provided you saw design details, and the cost was right)
John