98 Big Bear 2x4 Moto 4 Issues
#11
#12
ya ill take a look tomorrow for ya and let you know when i get home tomorrow night i just have never heard anyone changing the gears out on any four wheeler im a big can-am rider and thats all ill ever ride so im not to familiar with many others on those type of but i just havent heard or seen anything out there to change the gearing around in them have you checked oemparts.net and try googling it and seeing if anything comes up but ill let ya know tomarrow on the carb
#13
#14
ok, I've got it to where it idles fine, but when I get on it to ride it, it acts like it's bogging down when I give it fuel. It will run fun and run like normal when I have the choke pulled out. and will run all the way up into top gear without sputtering when I have the choke pulled. I'm confused on what is going on here.
#15
the pilot jet is plugged, thats the small jet, there are some real small holes in the end and sides of it, need to remove the jet, spray carb cleaner and compressed air through it, Ive had to use real small wire to get holes open, ,take your time, clean all passage ways real goood, if gas is stii runnin out the bottom it needs a new needle and seat, parts diagram calls it a needle valve
#16
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)