What I have done to the timberwolf
 

Heres what i have done so far, looking for opinions and suggestions..


Thought I took a pic of before i took the rear plastic off :banghead3

https://sphotos-b.xx.fbcdn.net/hphot...76560031_n.jpg

https://fbcdn-sphotos-g-a.akamaihd.n...42979561_n.jpg

https://fbcdn-sphotos-f-a.akamaihd.n...39433107_n.jpg

Could not get it to start even after cleaning and retiming, So here is what i found

https://fbcdn-sphotos-e-a.akamaihd.n...86498418_n.jpg

https://fbcdn-sphotos-f-a.akamaihd.n...73697155_n.jpg

https://sphotos-b.xx.fbcdn.net/hphot...80824909_n.jpg

So since I needed to get a valve job done to it I figured I would do the plastics and clean the bike up a bit

https://fbcdn-sphotos-f-a.akamaihd.n...77114234_n.jpg

https://fbcdn-sphotos-d-a.akamaihd.n...21088801_n.jpg

https://fbcdn-sphotos-b-a.akamaihd.n...63745873_n.jpg

Bumper & Grill Guard being rockguarded

https://fbcdn-sphotos-h-a.akamaihd.n...46454837_n.jpg

https://fbcdn-sphotos-g-a.akamaihd.n...17818128_n.jpg

https://fbcdn-sphotos-a-a.akamaihd.n...19725058_n.jpg

Bike after having all plastics removed

https://sphotos-b.xx.fbcdn.net/hphot...08285581_n.jpg

Tires & Rims before

https://lh4.googleusercontent.com/-G...002_192708.jpg

Rim after

https://lh3.googleusercontent.com/-y...002_192653.jpg

Tire after

https://lh3.googleusercontent.com/-4...002_192641.jpg

Front plastic after

https://lh4.googleusercontent.com/-l...003_181422.jpg

Tire had not been changed on the one side yet

https://lh4.googleusercontent.com/-a...003_181416.jpg

RockGuarded and repaired the plastic on the lower half of the rear

https://lh5.googleusercontent.com/-D...004_182847.jpg

Back Plastic

https://lh5.googleusercontent.com/-A...004_182853.jpg

On Bike

https://lh6.googleusercontent.com/-H...004_182944.jpg

Plastic repair

https://lh4.googleusercontent.com/-N...004_182957.jpg

Old rear strut :banghead3

https://lh6.googleusercontent.com/-w...004_182751.jpg

https://lh4.googleusercontent.com/-2...004_182757.jpg

https://lh3.googleusercontent.com/-b...004_182741.jpg

Rear bumper

https://lh4.googleusercontent.com/-h...004_182702.jpg

Ok, Looking for opinions, Should I paint the top of the rear where I did the plastic repar with black rockguard only in the textured area? Should I keep or remove the rear bumper, its a aftermarket and makes the bike about half a foot longer. Also opinions on the bike overall?

I think the rear bumper is too big to look good. Maybe the front one too. I also liked the other front tires better. But other than that it is looking good. Its amazing how simple looking they are with no plastic on them. haha