No spark 86 YFM 225. Help!
#1
#6
One thing that I did notice is that there are 2 in line fuses that come out of the harness on the right side of the ATV. One of which is a circuite breaker and the other one is an in line fuse. The in line fuse looks to be good with no breaks in the element. The other "circuite breaker switch has small round red button plunger style. Would either of those cause a no spark situation?
#7
stator : .28 ohms with multimeter set at 20k and 281 set at 2000.
pulsor / pick up : .40 ohms with multimeter set at 20k and 406 set at 2000
ignition coil: 2.3 ohms with multimeter set at 200k (red lead in sparkplug boot and black lead grounded to engine block). .8 ohms with multimeter set at 200k (red lead in primary wire and black lead grounded to block.)
does anyone know if these sound right?
went back and checked out all the grounds and all look good. Checked run / off switch again and that seemed to check out too.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)