Alright I’ve got a 04 yfz450 an I need to change the carrier bearings. But I can’t get the brake hub to move at all any help is appreciated.

 

I just went thru this in my raptor. The 2 nuts were also very challenging. I used heat, lots of Pb blaster and I destroyed my rotor because I used that to hammer on. I even used a cutoff wheel and removed part of the hub all the way around and was very careful to not gouged the axle. It took hoirs of hitting to remove that hub but I got it. Good luck. I hope yours isn’t as rusted tigjt as mine was.