1995 Kodiak 400 4X4 carb question
 

https://cimg9.ibsrv.net/gimg/atvconn...a389cab013.jpg
I pulled this part outta the carb as i was rebuilding it. The seals are bad on it and i can't find this part. It's not even shown in the diagram. Anyone know where i can get new seals?

Welcome to the forums.

If it's just rubber rings, you may be able to pick some up at a parts store.

That's the jet block that the main jet screws into the bottom of and the slide rides in. Not sold separately or serviceable. Metric sized o-rings. A good hardware store may be able to help.

They dont look to be like regular o rings, they are formed a little different. That's why i didn't go to the hardware store and get some o rings. Thanks for the replies.

Possible they may be a flatter style o-ring,but If it's leaking as you say you may still be able to find them. Plus over time they may have flattened out also?

Yes the outside may have flattened out, but the inside of the seal looks to have a form different then an o ring. I'll take it to a hydraulic fitting shop and hardware store to see if they have anything that will work. I'm sure the right o ring would work fine, i was just hoping for the OEM style part.