well i broke a tie rod end about 3 weeks ago, and while in the process of getting one still havent started up my warrior....until today and it won't start, battery was dead so i chrged it up, then it still wouldn't start so i took the spark plug out and cleaned it( it was black..is that good or bad?) so... any ideas[img]i/expressions/face-icon-small-confused.gif[/img]? any info appreciated,[img]i/expressions/face-icon-small-happy.gif[/img]

warrior350megamax

Does it try to start or does it make any noise at all while trying to start it. If it dont check the fuse under the left rear fender. I know this b/c i charged my batt. in the machine and it blew the fuse.

it tries to start but it just won't it's like there a safety or something that i accidently hit that makes it not able to start, even so, does anyone think it's the spark plug? thanks again

warrior350megamax

When is the last time that you hade your valves adjusted, I have heard that if your valves aint adjusted right it wont start. Try the plug though it's cheap way to rule out problems.

since i got the warrior in march i have never checked the valves, i dought the guy before me did either, are they easy to check? thanks

warrior350megamax