I was thinking of putting on a new Pro-Curcuit pipe and silencer on my 2000 Blaster and I wanted to know if anyone has tried any of the Pro-Curcuit pipes yet. I mostly ride in the woods so I would be looking mostly for low to mid power. Also I plan on putting in a UNI filter, drilling some holes in the airbox lid, and putting in Boyesen reed.
2000 Yamaha Blaster |
Pro Curcuit does not make pipes for a Blaster. the Banshee pipes just came out recently. from what i heard the Blaster pipes are in the works.
|
In the new Rocky Mountain Catalog they show that they have the new Pro-Circuit pipe and silencer for the Blaster.
|
I have FMF Fatty pipes on my blaster and they work so good that I got a set for my Banshee.
If you whant me to I can find out more about the pro-curcuit pipes for you. |
I have the same mods to my blaster, for the exception of the pro circuit silencer, I have a fmf turbine core II. Do you know what I should change the jetting to?? Thanks a lot.
|
Did you get jets with the pipes?
What modifications have you done to your Blaster? 00 Banshee 89 250R |
I haven't got any jets yet, I dont know what size to go up to. I also still have the stock pipe with an FMF turbine core II silencer. I have also put on boysen reeds, a uni air filter, and put 6 one inch holes in my air box lid, along with a 14 tooth front sprocket.
|
I would get a FMF Fatty pipes and I would put in a 260 jet.
If you get the Pipes it will come with a jet |
OK, cool, thank you very much.
|
they do make a pro curcuit blaster pipe, and silencer! on found the add on page 65 at the top, of the may dirt wheels. pipe and silencer combo for $219. i personally have a fmf fatty and turbine core 2 on my blaster and its got good power pretty much all around.
adam y2k 400ex,WB e-series,k&n power kit, ceet cover 92 blaster, too many mods to list |
All times are GMT -5. The time now is 02:47 AM. |
© 2024 MH Sub I, LLC dba Internet Brands