Paiute Trail, Utah
#861
I remember seeing on a tv show about offroading across Alaska a few years ago, one group had something that looked like the blade on a plow that they would simply dig into the ground and winch from when there were no trees. These were full size rigs wheeling across Alaska in a race for a $50,000 price I think. They had to pass through checkpoints each day and the times were cumulative, so if one group finished 20 minutes ahead, they carried that into the next day. The group with the plow thing ended up winning too. It would obviously be very heavy and bulky to carry on an atv(possibly a utv though) but since atvs are lighter, you could use something smaller. It didn't always work that well, sometimes the mud was so sloppy that sometimes the winch would simply pull it out of the ground. Again, a much lighter atv wouldn't be as likely to pull it out of the ground.
#863
#864
I love 4-wd :d
If I were to buy some type of an anchor this is what I'd get, $21.00.
I've heard people say they work great.
Last week was the first time I've been in a jam like I was with nothing to winch from so its not too likely that I'll be buying one. :d
I was fortunate to have enough rope and tow straps to reach something to winch from.
I bought a new rope to replace the one I broke so I'll cut off what I think is weak and put hooks on the ends and end up with another 30-40' foot tow rope.
Besides, my trunk is full. LOL
If I were to buy some type of an anchor this is what I'd get, $21.00.
I've heard people say they work great.
Last week was the first time I've been in a jam like I was with nothing to winch from so its not too likely that I'll be buying one. :d
I was fortunate to have enough rope and tow straps to reach something to winch from.
I bought a new rope to replace the one I broke so I'll cut off what I think is weak and put hooks on the ends and end up with another 30-40' foot tow rope.
Besides, my trunk is full. LOL
#865
I bought a 50' 1/4" synthetic rope on amazon for $20.
I cut the spool end at a 45°
then I glued it into a Bic pen cap
Then I fed the cap and rope about 4" up the inside of the rope.
Here's the loop so I could put a hook on both ends.
The finished product.
A 1/4" 50' synthetic recovery rope.
I cut the spool end at a 45°
then I glued it into a Bic pen cap
Then I fed the cap and rope about 4" up the inside of the rope.
Here's the loop so I could put a hook on both ends.
The finished product.
A 1/4" 50' synthetic recovery rope.
#867
I had that 50' rope and didn't know what to do with it so I asked everyone how to put the loop in the end of it.
The rope on my winch broke but that held up just fine.
I'm going to cut back the rope that busted and do the same to it. I should end up with another 40' recovery rope.
I got my new rope, 5600 lb. I hope it lasts longer than my last one. LOL
#868
Why the ------ didn't someone tell me about using a Bic pen cap to thread rope back into itself? I used a coat hanger and made a small hook to pull the rope. Something tells me your way was easier. Got sick of busting either metal cable or synthetic rope plowing. I fed about 6' of 1/4" synthetic into a larger rope that I had. So far, so good. No breaks this year.
#869
#870
I loaded my camper yesterday preparing for my summer adventures.
I bought my truck with the intent of buying a slide-in camper. I bought the truck in 2013 and finally found the right camper last fall.
It is loaded with AC, electric jacks, heated tanks and tons more. Used campers for 8' beds are the buyers market these days. A friend of mine owns a RV dealership and he told me that last year over 80% of all the new campers he sold were for short bed trucks.
I'm sure you would just love a tour of the inside.
Not all of them will be here on the Paiute Trail but when I do go I'll post the pictures here anyway. I hope that's OK.