honda 1994 trx 200 type II
You are thinking sportquads....LOL....I've made the same mistake telling this to someone before. After you've dealt with sportquads so long, it becomes habit.
Loosen the 4 17mm bolts holding the bearing carrier to the frame. Lift and support the quad so that the back tires are off the ground. There are two chain adjusters poking out the back with 12mm nuts on them. Run them up equally. If you do not, the chain will derail.
On this machine, around 3" of slack right behind the swingarm pivot bolt will be fine. It will seem loose, but when you set it back on the ground, it will tighten up a bit.
Set the machine bak on the ground and tighten the 4 carrier bolts and you are done.
Don't forget to lube the chain while you are there.