Goes on easy. Comes off hard. Dear ATVC: I’ve got an 18-year-old 2wd Honda four wheeler. It rides and runs just like new. The one problem I have with it is the gas cap. It’s so tight I can’t remove it and have to have a very strong friend do it for me. I’ve tried […] More »

Is there a point? Dear ATVC: I was just reviewing your piece on the Mahindra ROXOR and all I have to say is WTH?! Who in their right mind is going to buy an expensive vehicle in 2018 putting out 62 Horsepower with a top speed of 45 mph? Maybe they have the US mixed […] More »

Engine Control Unit. Dear ATVC: I have 2005 Suzuki King Quad 700. My question is how reliable is the Copperhead ECU? My factory ECU has gone out and need to get a new unit. CannonBall700 The Copperhead ECU comes from Velocity Devices Inc. and in our experience, the reliability will be equal to what you […] More »

Quality and country are not synonymous. Dear ATVC: After looking at your coverage of the CFMoto Z10, I think this is going to be a game changer. Especially if it is priced right. My question is why don’t more Chinese companies take advantage of this untapped market? Traditionally off-brand Chinese manufacturers have “played it safe” […] More »

We’d begin looking here for answers. Dear ATVC: I have a Linhai Rustler 260. Everything works perfectly until the engine gets hot and then it starts to misfire and eventually cuts out. I have changed the spark plug, coil and CDI. I set the valve gap and serviced the carb. But nothing seems to work. […] More »

Dear ATVC: Hello I’m looking at a new Odes side by side 800 or 1000 so I was wondering if you have any information on them good or bad. I don’t know anyone that owns one or knows anyone that has one. Of course the dealers say they are the best value on the market. […] More »

Mystery machine. Dear ATVC: So I bought this ATV for a cheap price but need help identifying it. I could not find engine serial # or any kind of VIN on the frame. Don’t know if the pics help. Jorge Ornelas Based upon the pics, particularity the plastic molds, we would guess that you have […] More »