Hey all. I have a 125cc Loncin dirt bike with no spark. It has no electric start just a kick. At the CDI I have a pulse from the pick-up and power from the stator going into CDI. Nothing is coming out of the yellow and black wire (this goes to the coil). I have bypassed the kill switch by disconnecting the ground wire into the switch.It is my understanding is that it grounds the CDI to prevent it from sending spark. Stator,coil,and CDI are new. Its a very simple system and it is giving me grief. I tested grounds for continuity and tested them all to the engine--all good. I tested all of the power wires for continuity and they are all good.
Any advice at this point would be great.
Thanks

 

what did you find wrong with this bike. i am there now same deal, i am down to bad parts or need new magneto