Help I'm stuck...can't keep my eton Yukon 150 cranked when pressing the throttle
 

I recently purchased a eton Yukon 150. I had the carburetor cleaned and it was running. After riding for a while it lost power. It will still start but it cuts off when I give it gas. Like its getting bogged down or flooded out. If I let it sit for a while it will start run and do the same thing. Could anyone tell me what the problem is and how could I fix it?

Either the carb needs cleaning again or not enough fuel getting through. A blocked tank filter can slow the supply to the carb, as can a blocked tank vent, which causes a vacuum in the tank. Some engines need choke when cold, and will cut out if part choke isn't used until they warm up. However, if the choke sticks open, an engine will run badly once warm.

Does this model have an electric choke or is it manual. Try and post pics of the carb set up. Does it get hot?