1) Engine problems.. If your quad wont run..post in here.

Linhai 300 stalls after 10-15 mins at high revs

Thread Tools
 
Search this Thread
 
  #1  
Old 07-06-2017, 04:50 PM
Andy4488's Avatar
Weekend Warrior
Thread Starter
Join Date: Jul 2017
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default Linhai 300 stalls after 10-15 mins at high revs

I have a Linhai LH200ATV-B. I changed the engine oil, gearbox oil, spark plug and air filter plus changed from 95 octane to 98 octane fuel recently. Since then whenever I ride at high revs (on the road) for 10-15 minutes it stalls and I have to wait 5-10 mins before it will start again. It runs fine at low-ish revs (in the woods) for long-ish rides without stalling. I want to narrow down the problem. There seem to be a lot of things it could be. Oil pressure, engine temperature, carb mixture, CDI, ignition coil, stator. Any diagnostic tips would be a help.
 
  #2  
Old 07-07-2017, 09:24 AM
Zrock's Avatar
Super Quad Patrol
Join Date: Aug 2013
Posts: 2,274
Received 20 Likes on 20 Posts
Default

i would start by changing fuel lines and giving the carb a good cleaning. their is a blockage someware causing u to drain the bowl under high rpm. Fuel filter if it has one as well
 

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 05:50 AM.