dose anyone know the horsepower numbers for the craycraft kit and the trinity kit (at the rear wheels)

 

Try doing a search,this topic has been "mildly" debated over the course of the last year,there are many threads on this.

 

Thats one way to put it. LMAO

 

last year at Aledo, 14mins dynoed his trinity 686 several times, and I think the best numbers he got was like 43hp??? Correct me if I'm wrong.

 

Adam is correct, most of the trinity 686's have dynoed around 44hp from what i have seen. I had a high of 44, i believe that gregv dynoed 44 at kens cycle center and michealaz dynoed in the mid 40's also.

Rob Johnson's 686 make more than you and kings 727's 69hp (686) vs. airraptors 62hp (727) and kings 65?? (727)

You are skewing the numbers air.

 

You shouldn't of even started this post there will be arguing and fighting on it for weeks! And yes my 686 made 58 RWHP. I'm done argueing about HP numbers, I could care less. Races is how you see whose faster arguing doesn't prove whos faster. Do you see how pointless this dyno arguing is guys? Just state how much HP you have and let the other people post theirs, you don't need to post other peoples HP numbers I think they are capable. I know you'll still argue but I thought I'd suggest not aruging for once and try to have a good converstaion.

 

so are you....
GregV's poorly tuned low compression pump gas bike got 54.52HP on Ohton dyno dyno chart

 

I would like to run Rob's bike again. King, you have to take into consideration that I had not acquired his swingarm at that point which transformed my bike into the "runner" that it is now. You remember how hairy my bike was to get through the whoops at Olds without the swingarm. When Rob gets his bike back and we get the swingarm back on it and get mine setup with a new swingarm, I think we may see that the margin is not that great, if any.

 

KRaptor I don't think Ben had Craycraft porting I think he did it himself and was a stock bore. But I'm not totally sure of that.

 

well my cousin is looking at the craycraft kit, the trinity set up, and possably have a port job and change of cam done locally. That's why I asked for the horsepower numbers. Asking which kit is better, I thought, would be more likely to start a flame war.