just try to find out the best

 

If you want to go all out then the crankenstien. For a REAL FAST 350cc motor call dan at patriot racing for some porting. There is a few around here that run Tony Dukas motors. The fmf 400cc pv kit is supposed to be a somewhat rideable monster.


Mike

 

where patriot racing at

 

He dont have a web site. Give me a few mins. and I'll PM you his #.


Mike

 

350-400cc....are you serious? 500+ cc banshee engines are available at upwards of 150hp. I know www.trinityracing.com has them, but there are probably dozens more.

 

Notice I hinted about the Crankenstien if you want to go crazy. I was trying to keep it under 2 g's. Ive seen some ported bikes on stock sleeve and out run 370's. I think he still wants it to be rideable. You can have a super fast rideable motor for under 650$.

Mike

 

How about the $650 and a +4mm crank and plate kit. Weld the crank too for a total of around $1300. That would be an economical runner.

 

i want to be crazy fast and still be a stock bore and stroke

 

With a good "medium" port job and a cool-head w/ 18cc domes you could be a strong competitor and still run on 93 octane[img]i/expressions/face-icon-small-smile.gif[/img].

 

I already have a milled head super light pistons and timing advanced