Yamaha Discussions about Yamaha ATVs.

who makes a good drag motor for the banshee

Thread Tools
 
Search this Thread
 
Old Jul 11, 2003 | 02:20 AM
  #21  
iluv2fly's Avatar
Range Rover
Joined: Jun 2003
Posts: 164
Likes: 0
Default who makes a good drag motor for the banshee

I know where you can get new wiseco long rod kits for 650.00 with shipping. That includes the crank with the rods installed new main bearings, top end gasket set, and the pro-lite pistons in any size. It makes it 370cc.
 
Reply
Old Jul 11, 2003 | 02:59 AM
  #22  
velocityraptor's Avatar
Pro Rider
Joined: Feb 2002
Posts: 1,666
Likes: 0
Default who makes a good drag motor for the banshee

Originally posted by: slapahobanshee
just try to find out the best


K&T would be my first choice.
 
Reply
Old Jul 11, 2003 | 03:31 AM
  #23  
DaBeechMan's Avatar
Extreme Pro Rider
Joined: Oct 2002
Posts: 4,433
Likes: 0
Default who makes a good drag motor for the banshee

yeah twister is working on a 1000cc triple. But first they need to get their 700 triple to run...

A&S has a stock bore stock stroke banshee running a 4.05 in a stock chassis. K&T's best running 350 is running on average a 4.15
 
Reply
Old Jul 11, 2003 | 04:05 AM
  #24  
slapahobanshee's Avatar
Thread Starter
|
Pro Rider
Joined: Dec 2002
Posts: 308
Likes: 0
Default who makes a good drag motor for the banshee

sounds fast to me
 
Reply
Old Jul 11, 2003 | 08:37 AM
  #25  
garyc660R's Avatar
Elite Pro Rider
Joined: Jan 2000
Posts: 6,996
Likes: 0
Default who makes a good drag motor for the banshee

Originally posted by: DaBeechMan
patriot racing DOES have a website, but dan is hellaciously backed up. Heck he doesnt even answer the phones half the time because he has his head in a motor. Trinity is a joke. Ive seen numerious 540cc cheetahs dyno at 115 horses...far lower then their "claimed" output.Rudy kurtz is one of the best with small bore motors, as well as A&S. Id personally go with rudy as he is a much more relaxed down to earth guy
R.K. is THE MAN......take a look at the head on your Trinity built big bore 6k engine......R.K. inscribed on the head! At the big drag event nearby that offered 25K in winnings the big boys showed up with their Trinity engines (top 10 runners) and ALL HAD R.K. on the head. I have one of his on the back porch now.
 
Reply
Old Jul 11, 2003 | 09:38 PM
  #26  
hondaracer305's Avatar
Pro Rider
Joined: Jan 2003
Posts: 2,683
Likes: 0
Default who makes a good drag motor for the banshee

In dirtwheels, there is an add about a t-rex powervalve engine that puts out 140hp for something like $2500.00
 
Reply
Old Jul 12, 2003 | 05:08 AM
  #27  
slapahobanshee's Avatar
Thread Starter
|
Pro Rider
Joined: Dec 2002
Posts: 308
Likes: 0
Default who makes a good drag motor for the banshee

think k&t or patriot racing are gonna be getting my money
 
Reply
Old Jul 12, 2003 | 05:24 AM
  #28  
DaBeechMan's Avatar
Extreme Pro Rider
Joined: Oct 2002
Posts: 4,433
Likes: 0
Default who makes a good drag motor for the banshee

maybe on trinity's dyno....lol but put that on a new dynojet with the updated software and it'd be around 115-120

Your better off sending it to patriot or rudy...
 
Reply
Old Jul 12, 2003 | 02:35 PM
  #29  
dsmike's Avatar
Pro Rider
Joined: Feb 2002
Posts: 1,041
Likes: 0
Default who makes a good drag motor for the banshee

i would try poncho hes the local guy here that will help you out with all your problems with it.

the other may be better but you will only meet them on the phone. and i know your not wanting to spend the money to get a 100+HP.


if you want to get ahold of him PM me.
 
Reply
Old Jul 13, 2003 | 06:47 AM
  #30  
slapahobanshee's Avatar
Thread Starter
|
Pro Rider
Joined: Dec 2002
Posts: 308
Likes: 0
Default who makes a good drag motor for the banshee

ok
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
generalpops
Polaris
5
Jun 5, 2015 08:23 PM
generalpops
Introduce Yourself
1
Jun 3, 2015 08:25 PM
hoopduerr
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
3
Jun 2, 2015 09:01 AM
hoopduerr
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
Jun 1, 2015 08:22 PM
neilbedwell
Introduce Yourself
2
May 29, 2015 02:24 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 10:13 PM.