OK, I have one that no one else has asked. Some of you dont care and some will answer, but all in fun and discussion. Can a highly modded Raptor outrun a highly modded STOCK BORE Shee? Distance is not a question. We can go 300,600,1320 feet. Both machines restricted to race gas only. Whatcha think? I personally believe it could be some tight racing going on.

 

If the Stock bore shee has the right pistons, port work, carbs., and set up it will be hard to beat in a drag race. I've have seen and rode some fast stock bore shees. If the 350 shee is done correctly its a sreamer. Just the facts about 2 strokers; cc's for cc's they can outrun a 4 stroke but A fully modded Raptor could give it a hard time. Some Raptors should be able to when you are talking about some Raptors having twice as many cc's as the shee. I'm a Raptor owner and it runs very hard; wouldnt trade for a shee and in no way am I talking down the Raptor or any other 4 stroke but them 2 strokers can get the job done. Slim

 

A few of my friends have some VERY well running stock bore shees and man do they HAUL A$$!! I think my Rappy is very fast but these things scream! He gets me the worst on hill climbs but on the flats its pretty neck and neck till he hits the high gears (at about 300 yds.) then he pulls away pretty good. Shees have way more drag race potential but arnt very reliable when built like that, 4 strokes built are much more reliable.

 

Grand River Racing has an adverised 350 cylinder port or you can get the whole cylinders and on alcohol they said they have dynoed their HP in the 90's! Takes a lot to get a Rap there.