YFZ-450 dyno result
#1
i don't kwow if it was already posted but here it is
this is my result of friday's dyno test
it was at 28c and atmospheric pression down to floor
i have 46.... hp to the rear wheels
here is the link
DYNO
my setting are:
no lid
baffle out
cam mod
pilot 45
main jet #170
mixture screw 2 turns
needle clip #5
elevation arround 800' above sea level
this is my result of friday's dyno test
it was at 28c and atmospheric pression down to floor
i have 46.... hp to the rear wheels
here is the link
DYNO
my setting are:
no lid
baffle out
cam mod
pilot 45
main jet #170
mixture screw 2 turns
needle clip #5
elevation arround 800' above sea level
#3
Originally posted by: mudsfun
wonder what the dip at 3700 is all about. good numbers.
wonder what the dip at 3700 is all about. good numbers.
but what i think is the start and it might be rich when he stepped on gas ... don't know for sure
#6
Originally posted by: Sandgod
Just curious was that w/ knobbies or tire similar to a Hoosier tire?? What was the stock hp numbers...
Just curious was that w/ knobbies or tire similar to a Hoosier tire?? What was the stock hp numbers...
it was on slick tire
they have a set of tire especialy for the dyno it was the same set they put on my Raptor 6 or 7 months ago
and the stock hp number if i remember well what they said to me is around 38-39hp at rear wheels and 26 lbs of torques
#7
Trending Topics
#9
Originally posted by: AlaskaYFM
So are you a time traveler??? The date on the dyno sheet says Sept 2003... [img]i/expressions/face-icon-small-smile.gif[/img]
Those are impressive numbers for no aftermarket exhaust!
So are you a time traveler??? The date on the dyno sheet says Sept 2003... [img]i/expressions/face-icon-small-smile.gif[/img]
Those are impressive numbers for no aftermarket exhaust!
i know ;-( don't border with the date stamp
i was a little upset after i seen that back at home


