i was at a race and lost my fmf pipe spring for my blaster the second time i rode it. i kept riding without it for a few days but then made my own that isn't very tight(just tight enough that i can get it off by hand)now on my left nerf bar there is small oil splatter marks but not on the right. is my engine leaking near the exhaust?the bolts are tight?do i need a new spring?i saw them in dennis kirk. they are only 5 bucks but shipping will be like 10. isn't there a cheaper way to fix this?thanks

 

You local shop doesnt have springs?? The oil leak is just some blow out that the pipe let escape because the spring didnt have enough tension to seal completely.

 

Check you local hardware store for springs. Places like Home Depot, Lowes, Eagle, all have a good assortment of springs that will fit your needs.

Also, most bike shops carry generic springs, just get the overall length that you need.

 

nac's has them for 2 bucks each. the chipping won't be much. 1-845-246-3086

 

Novaman,

I made a fair offer on that Blaster Pipe and silencer. I want it. Quit messing around and sell it to me before your reputation begins to suffer on this site!

Call me or e-mail me at rob4092@home.com so we can get this thing resolved. Otherwise, quit wasting our time!

 

tell me when i said i would sell you my fmf pipe and silencer. are you talking about buying my stock pipe and silencer. are you just giving me a hard time?

 

hey novaman15, where and for how much did you find a Vito reed spacer?

 

i got it from www.moto-man.com . it says it's a mossabarger reed spacer but when you get it it's actually a vito. it's about 17.00.