Trail Boss 325 Sprocket/Chain replacement
#1
My front sprocket finally wore out (after over 4 years of riding), so I am prepared to spend the $$$ to replace the chain and rear sprocket as well. What else should I buy besides these three parts?
I am planning on buying a couple of extra clips (for the front) in case I bugger them up taking off/on. I also will get a couple of extra spare Nylock nuts in case I mess them up too. There is a foam seal on the rear axle too, that I will go ahead and purchase, just to have on hand if I mess it up.
I am getting a couple of other spare parts (small $$$) but just to have, because my dealer is difficult to get to for me.
Any advice on parts that are must-haves to buy when ordering?
Larry
I am planning on buying a couple of extra clips (for the front) in case I bugger them up taking off/on. I also will get a couple of extra spare Nylock nuts in case I mess them up too. There is a foam seal on the rear axle too, that I will go ahead and purchase, just to have on hand if I mess it up.
I am getting a couple of other spare parts (small $$$) but just to have, because my dealer is difficult to get to for me.
Any advice on parts that are must-haves to buy when ordering?
Larry
#2
dont get no cheap sprokets and chain they will just wear out way to fast. look for like a D.I.D chain they have a couple differnt types and they hold up realy good. get a chain tensinor it will help alot [img]i/expressions/face-icon-small-wink.gif[/img]
Thread
Thread Starter
Forum
Replies
Last Post
1000gade
ATV Videos
1
Jul 16, 2015 10:48 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




