ajusting valves??
May 21, 2004 | 02:43 AM
#2
Weekend Warrior
Joined: Feb 2004
Posts: 22
Likes: 0
ajusting valves??
1. Remove Gas tank
2. remove small valve covers on intake and exhaust
3. set engine to TDC using alignment mark on flywheel (you have to remove the small cover with a screw slot in it on the side cover).
Align with the T mark to the hash mark on the case
4. Get out a set of feeler guages and set the valves accoring to the sticker on your quad.
This is off the top of my head so it may not be a perfect set of instructions, if you don't know how to do this for the first time its prob a good idea to shell out the $20.00 for a service manual (Haynes, Clymer).
2. remove small valve covers on intake and exhaust
3. set engine to TDC using alignment mark on flywheel (you have to remove the small cover with a screw slot in it on the side cover).
Align with the T mark to the hash mark on the case
4. Get out a set of feeler guages and set the valves accoring to the sticker on your quad.
This is off the top of my head so it may not be a perfect set of instructions, if you don't know how to do this for the first time its prob a good idea to shell out the $20.00 for a service manual (Haynes, Clymer).
Thread
Thread Starter
Forum
Replies
Last Post
Scooter's Shop
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
23
Oct 22, 2015 07:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)