Arctic Cat Discussions about Arctic Cat ATVs.

Arctic Cat stepping up to the plate

Thread Tools
 
Search this Thread
 
Old Aug 11, 2004 | 06:58 PM
  #1  
heyyou's Avatar
Thread Starter
|
Pro Rider
Joined: Mar 2004
Posts: 444
Likes: 0
Default Arctic Cat stepping up to the plate

I don't have them in my grubby hands yet but my dealer told me I may have my exhust screw covers by friday,you know those things that almost glow red beside your leg.A/C is going to send them out to everyone soon,so they say anyway.
Also in the same shipment there should be a test RF filter to jam on my bike to see if it cures limp mode,so this is the news we have all been waiting for.I'll feel alot better when I get them in my hands though.[img]i/expressions/face-icon-small-happy.gif[/img][img]i/expressions/face-icon-small-cool.gif[/img]
 
Reply
Old Aug 11, 2004 | 07:10 PM
  #2  
orky4969's Avatar
Pro Rider
Joined: Apr 2004
Posts: 357
Likes: 0
Default Arctic Cat stepping up to the plate

my father was rippin and arcticat ended up sending him a new design that they install premenetly into your quad that stops the limp mode unless your belt really is worn. The reason it gets set off sometimes is because of certain hermonics in the engine.
so he got that bout a month ago.
 
Reply
Old Aug 11, 2004 | 09:57 PM
  #3  
ng's Avatar
ng
Trailblazer
Joined: Mar 2004
Posts: 88
Likes: 0
Default Arctic Cat stepping up to the plate

Good luck,Let us know if it works.
 
Reply
Old Aug 11, 2004 | 10:33 PM
  #4  
orky4969's Avatar
Pro Rider
Joined: Apr 2004
Posts: 357
Likes: 0
Default Arctic Cat stepping up to the plate

if what u just said was directed torwards myself, then yah it has worked so far and he's put on aprox another 30hrs. and 350 miles
 
Reply
Old Aug 12, 2004 | 09:05 AM
  #5  
turbocoupe's Avatar
Range Rover
Joined: Jan 2004
Posts: 156
Likes: 0
Default Arctic Cat stepping up to the plate

ir your burning your leg on those exh screws russel makes anodized bolt caps that snap over these you can get them from jegs or summit for 3.99 they work very well
 
Reply
Old Aug 16, 2004 | 06:16 PM
  #6  
heyyou's Avatar
Thread Starter
|
Pro Rider
Joined: Mar 2004
Posts: 444
Likes: 0
Default Arctic Cat stepping up to the plate

My RF filter came in today but the screw covers won't be in untill tomorrow,I hope.I didn't bother to go in and get the filter as its a bit of a drive to town,I'll wait and make one trip.
 
Reply
Old Aug 19, 2004 | 07:28 PM
  #7  
heyyou's Avatar
Thread Starter
|
Pro Rider
Joined: Mar 2004
Posts: 444
Likes: 0
Default Arctic Cat stepping up to the plate

Well my screw covers came in today so to town I went.The part number for them is 0437-039 KIT,EXHAUST GROMMET,is what its called.

No,there is no part number on the RF filter.The box says,04 650 Black Box for belt light.
 
Reply
Old Aug 25, 2004 | 10:40 PM
  #8  
Zeke65's Avatar
Weekend Warrior
Joined: Aug 2004
Posts: 6
Likes: 0
Default Arctic Cat stepping up to the plate

Has this been adressed in the '05s. I'm picking up a AC 650 v2 this weekend. What else should I know? I'm up on the limp mode (supposed to be fixed?), and the belt springs in the tranny. Are these screws the only other issues I should know about?

Thanks

Zeke65
 
Reply
Old Sep 4, 2004 | 01:00 PM
  #9  
heyyou's Avatar
Thread Starter
|
Pro Rider
Joined: Mar 2004
Posts: 444
Likes: 0
Default Arctic Cat stepping up to the plate

Arctic Cat is going with the RF filter for a fix for sure.My dealer just let me know,he has six more of them.A/C WAS listening to us after all.[img]i/expressions/face-icon-small-happy.gif[/img]
 
Reply
Old Sep 5, 2004 | 12:35 AM
  #10  
vhcat400i's Avatar
Pro Rider
Joined: Sep 2002
Posts: 352
Likes: 0
Default Arctic Cat stepping up to the plate

Here is the part number # 0430-044A .

Zeke65,
Supposidly it has been addressed with the 05's.They are all going to have the RF filter on them from the factory (according to my dealer).

Vince
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Customer Service #1
Arctic Cat
73
May 15, 2020 08:46 AM
tysonbully
Chinese Quads
3
Sep 28, 2015 02:30 AM
brad patnoe
Arctic Cat
2
Sep 23, 2015 06:44 PM
ATVC Correspondent
General RUV / UTV Discussion
1
Sep 22, 2015 10:35 AM
vtech
Help With Forum Software!
1
Sep 2, 2015 05:59 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 10:21 AM.