RF Filter for limp mode fix
Aug 20, 2004 | 01:12 AM
#1
Thread Starter
|
Range Rover
Joined: Mar 2003
Posts: 136
Likes: 0
RF Filter for limp mode fix
Hi Guys,
I finally received the RF Filter from my dealer in the mail today. For those of you who would like the part # it is #0430-044A. I hope this connection does away with the limp mode problem. There was no charge involved.
I'm now trying to get the fix for the hot screws on the heat shield, left side of motor. It's called the Exhaust Grommet Kit- Part # 0437-039. My dealer promised to call AC on this & get back with me. Some guys have already received theirs, so they are available. Hope this info helps some of you get your parts.
Regards, Jerico1
I finally received the RF Filter from my dealer in the mail today. For those of you who would like the part # it is #0430-044A. I hope this connection does away with the limp mode problem. There was no charge involved.
I'm now trying to get the fix for the hot screws on the heat shield, left side of motor. It's called the Exhaust Grommet Kit- Part # 0437-039. My dealer promised to call AC on this & get back with me. Some guys have already received theirs, so they are available. Hope this info helps some of you get your parts.
Regards, Jerico1
Thread
Thread Starter
Forum
Replies
Last Post
Steeldon
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
4
Sep 9, 2015 09:38 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)