how much do you think a bore job would cost. i have no idea. i know someone who i believe could do it for me, but i was just wondering about atn estimate. NEED MORE POWER!!!

 

go ask the dude....

 

its not the boring (machining) thats gonna cost you alot. you will need to contact your local machinist to see about that. its gonna be the parts to fit your bored jug thats gonna cost. you got piston, rings, cam..all that happy horse crap. go to powroll.com and check out their kits. they offer all of it and they can even machine out your jug.

 

Your not going to gain any power from boring it way out, but a bore/hone sholdnt cost more than 50 bucks.

 

Alba 400cc Stroker [img]i/expressions/face-icon-small-happy.gif[/img] that'll get more power $1300... But i just got the Banshee bored/honed...bout $75 but that was at a dealer

 

Well powroll makes two bore kits for the warrior, a 365cc and a 430cc. http://www.powroll.com/P_YAMAHA_WARRIOR.htm The 365cc is reltativly cheap for around $500. The 430cc is about $1,300 subtract around $400 for a refund on your stock cam core. I am thinking about getting the 430cc kit because it it suppose to give you 80%+ increase in HP. Alba also has a 400cc stroker kit which doesnt requier any bore at all. It puts you up to about 30HP according to their dino chart (the warriors stock HP is around 19-20). I think the alba is about $1,300 as well minus around $400 for a rebate. So you could pay the same price and get more power from the 430cc bore and stroke kit, but then you'll have to get all the machining work done.(not sure how much that costs)

-peace

 

the kit alba sells for the warrior (using the stock bore) gives around 40 horsepower, atleast thats what the dyno charts say on the site.

 

when i bored out my cylenders for a rebuild it cost 50 bucks i went through Northwest sleeve they also got my weisco hi comp piston and rings for me cheaper than i could have from any where else