Anyone have any pics of a nice Water temp gauge installation. The fan on my 700 run alot and I would like to keep an eye on the Temp, would like it to look like a factory set up, not something a 3 year old did.

Just looking for some ideas and where to buy the gauge.

 

you can go to the local autozone or walmart and get a mini temp gauge kit, I think those kits come with all the stuff to make it work. I have the stuff at the GM proving grounds to tap in a thermocouple fitting and a thermocouple to read the temp. I never thought of doing this but would be a great idea. I may have to look into it myself.

 

Since you work for GM and all do you have any information on the 2006 Chevy Silverado that you could let leak? JW[img]i/expressions/face-icon-small-smile.gif[/img]

 

I run a stewart warner on my 400, but its not real water resistant. Its supposed to be a marine version, but I dont think it is.
Hi-lifter makes one that I think is waterproof.

 

well for the most part all I ever see is alot of vehicles in the leather camoflauged covers as far as body stuff goes. I am in the V6 powertrain group so I don't deal with the truck group much but I do know they have been installing V10's in the trucks. they have been experimenting with the grand prix's with V10's also.

 

I have the High Lifter gauge installed on my SP800. Here is a picture:

http://www.ansley.net/pic.php?image=...16_(Small).JPG

 

Very cool. Is this going to be GM's answer to the Dodge Viper? Sounds bad a$$.

 

not sure but I do know that they are having problems with the ign. coils due to having a coil per plug so instead of running one engine controller they have to run two engine controllers.

 

I have pics of the highlifter guage on my web site too

[img]i/expressions/face-icon-small-smile.gif[/img]