Warrior vs z400
#4
Originally posted by: BoysInBlue
Oh i thought it would at least keep up with it , oh by the way i walk away from blasters all the time [img]i/expressions/face-icon-small-smile.gif[/img]
Oh i thought it would at least keep up with it , oh by the way i walk away from blasters all the time [img]i/expressions/face-icon-small-smile.gif[/img]
#5
This topic again?! Well anyway, a straight drag is the z without a question, but throw some turns in there and it could get closer. If the warrior or rap350 is widened by 2" on each side it would win through the turns. It's got a 3 or 4" lower seat height, and engine is mounted a couple inches further up allowing it to turn much faster and sharper than the z. The 6 speed trans comes in handy as well to keep in the top end or high midrange power through the turns. A friend of mine has trouble keeping in the powerband on the z around most of the tight turns, even with the gearing adjusted and lowered to his weight.
#6
Originally posted by: Banshee392
Yeah, stock ones haha.
Originally posted by: BoysInBlue
Oh i thought it would at least keep up with it , oh by the way i walk away from blasters all the time [img]i/expressions/face-icon-small-smile.gif[/img]
Oh i thought it would at least keep up with it , oh by the way i walk away from blasters all the time [img]i/expressions/face-icon-small-smile.gif[/img]
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



