YFZ drag race start in second gear.
#1
Just wondering if any of you have tried this technique. I was doing it out at Dumont a few weeks ago.
Put it in second while parked, then roast the throttle and rip the clutch, I have to sit way up on the gas tank
to keep the front end down when full throttle is hammered on through the power band...
My friend has a TRX450R jetted with a HMF pipe (he couldnt roast from 2nd, tried a bunch of times it just stalled out).
We were doing this both at the same time next to each other just messin around..
Im not that good at riding with the front end 2-3 feet off the ground through the power band yet..
Let me know if you have done this and can or cant...
L8R
-J
Put it in second while parked, then roast the throttle and rip the clutch, I have to sit way up on the gas tank
to keep the front end down when full throttle is hammered on through the power band...
My friend has a TRX450R jetted with a HMF pipe (he couldnt roast from 2nd, tried a bunch of times it just stalled out).
We were doing this both at the same time next to each other just messin around..
Im not that good at riding with the front end 2-3 feet off the ground through the power band yet..
Let me know if you have done this and can or cant...
L8R
-J
Thread
Thread Starter
Forum
Replies
Last Post
Big600twin
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
3
Jun 10, 2015 03:01 PM
THEXOTIC1
Buying an ATV
3
Jan 6, 2001 09:39 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




