Hey,I have three chinese atvs. Besides locktiting everything that moves and the clutch noise in the 110st bike in third gear that I fixed with a can of stp. The bikes are great if you have a little common sense. I would love to have a parts list or service manual.
The problem I have is cross the spark plugs. the 110cc uses a a7tc . the 150cc and 200cc uses a d8tc. Anyone have clue?
I already switched the front wheels around and watching a few spacers on ebay. please help![img]i/expressions/face-icon-small-confused.gif[/img]

 

The yamoto 150 came with a 7tc and I replaced it with a C7HSA NGK. I would assume you want a C8HSA NGK for the 150. I would love to have a service manual too! I dont think they exist.

 

thanks for the reply.I ll check it out!

 

Hi,
Whats the diff in the 7 and 8 in the plug#s ,the heat?

 

I requested a shop manual directly from Kazuma, they said due to the number of clones being manufactured of their ATVs, they no longer supply or sell a shop manual. They also said to contact them directly with technical questions and they will answer them.

That was from the contact point off the Stannic website.

 

Yes, the heat range.

 

All sizes of Redcat/Kazuma atvs & bikes take the same plug NGK C7HSA

 

Thanks kidatvs, and welcome to the forum.

 

Here ya go... buy this manual.... they are copied from these motors....its what I use & it works great.

http://www.themotorbookstore.com/50ohcsin19.html

 

Thanks everyone for your help!purchased honda manual today![img]i/expressions/face-icon-small-smile.gif[/img]