hi guys i need to get hold of a set of bigger valves for my raptor where do i get

 

you would be wasting your money unless you get a full port and polish bigger carbs, larger bore and stroke, and a more free flowing exhaust. It is very hard to actually set up a raptor to take advantage up bigger valves on anything but a drag quad. You would be better off getting a good set of stainless steel valves and have a mild head port with a good 3angle valve job, much cheaper and will work extremly well with your set up. Look on ebay or try ferrera valves I think.

 

thanx for the tip

 

if you dont have a bore over 686 you wont be needing the bigger valves, unless you have some MASSIVE porting with the FCRs to match.

 

louthan engineering. they install 3 32mm intake vlves and port and polish. they know what they are dsoing. i am getting them to do mine up