I just have to say that Bubba's customer service is top notch just like Rick Ritter's. I had him do the porting on my cylinder and just got the ATV together yesterday. His shipping package of my cylinder was top notch and his porting work was also excellent, very fast turn around...I shipped cylinder out Wednesday, got cylinder back next Wednesday. He also answered any questions I had. He helped with my clutching, jetting, and other recommendations to get more out of the porting. I am very happy with the results of the porting. I am just breaking in the rebuilt engine, and the jetting is most likely very rich, but power is excellent from idle to WOT. Thanks again Bubba.

Brian

 

Bubba297 is an EXCELLENT guy, I have asked him numerous questions on here and most people would probably get aggervated and not respond. But Bubba ALWAYS gives you an honest answer and if you will take his advise and put it to work it will WORK!
Thanks ALOT Bubba!
16polaris

 

and here I thought I was the only one to be a pain in his A#$ asking a ton of questions.


very nice guy and very helpful.

 

BUBBA built the engine in my quad and his old quad, ( same quad ) listed below.

Very happy with his work and all of his answers to my questions.


I may be one of the few to say my quad is:

BUBBA ported
BUBBA designed
BUBBA built
BUBBA raced
BUBBA owned
BUBBA sold
"BUBBA BIKE" mine

Thanks BUBBA 297, a great asset to the Polaris and ATV community.

handycap

 

Bubba does a great job. He and I have been buddies a long time. Thanks for mentioning me in a post about him .

Rick Ritter

 

No problem Rick. I bought my clutch springs from you even though they are HPD springs. Thanks for your great service also.

 

Rick and Bubba are both top notch guys with awesome tuning skills.

 

Bubba and Rick who are they?

 

Never heard of them.


Oh by the way thanks Bubba for the help on the banshee problem the other night.
Louie

 

Thanks guys, I appreciate the good info. Next post you'll hear from WIscrambler is probably him telling everyone he wheelie'd the bike over on himself. The power will be greatly different for sure.
I help all I can. I am also not the kind of person to tell someone BS or what I think will work without some good judgement or experience behind it. I try to give the best advice I can and will answer any questions asked to me.

On another note, by no means do I ever try to steer business away from Rick Ritter. As a matter of fact there have been many times when I could have farmed out some aspects of an engine and done the job, but instead have put them onto Rick for the whole package deal. I greatly respect Rick both as a person and a shop owner, and I do still spend money with him whenever I can. I have my normal 8-5 job, but Rick has to support his family from his business. Again thanks, and Brian let us know when you get it broke in and jetted.