Yamaha Discussions about Yamaha ATVs.

Banshee Wheelie

Thread Tools
 
Search this Thread
 
Old Feb 25, 2006 | 10:46 PM
  #1  
whosyodaddy's Avatar
Thread Starter
|
Range Rover
Joined: Nov 2005
Posts: 112
Likes: 0
Default Banshee Wheelie

Can someone help me out here? I've been tryin to wheelie muh banshee for tha last 2 days now and every time i try it scares tha crap outta me. Should I try popping tha clutch to get it up? idk y i can't, it seems too stable. Then sometimes it bout rips muh arms off too, lol. Any advice would really help, thnx
 
Reply
Old Feb 25, 2006 | 10:49 PM
  #2  
KevinHarper06's Avatar
Trailblazer
Joined: Jan 2006
Posts: 26
Likes: 0
Default Banshee Wheelie

Banshees arnt much of wheelieing bikes. I dont own one so cant tell you how to do one. Most wheelies on banshees arnt from a start.. mostly haulin *** =p try that [img]i/expressions/face-icon-small-wink.gif[/img]
 
Reply
Old Feb 25, 2006 | 10:53 PM
  #3  
lorenzo's Avatar
Range Rover
Joined: Nov 2004
Posts: 134
Likes: 0
Default Banshee Wheelie

try rolling in like 2nd, not too fast, hold the clutch, rev it high buy not too high then let it rip.... its better to be rolling already and watch the powerband.. after you get that then yourr be busting out wheelies left and right... have fun oh try practicing standing a little when you do wheelie to keep the control of the bike.. or grip with your knees
 
Reply
Old Feb 25, 2006 | 11:03 PM
  #4  
430exrider's Avatar
Pro Rider
Joined: Feb 2006
Posts: 225
Likes: 0
Default Banshee Wheelie

only rode a banshee once but try this in 2nd clutch it the first few time just bring it up a little bit when you feel confortable then bring it up all the way if it comes back to far hit the rear brakes if 2nd to low of a gear try 3rd as i said only rode a banshee once don't know how their geared
 
Reply
Old Feb 26, 2006 | 07:32 AM
  #5  
dreamMACHINE's Avatar
Pro Rider
Joined: Jun 2005
Posts: 305
Likes: 0
Default Banshee Wheelie

hya, wheelies look best when you do them sitting, so sit further back, 2nd gear go slowly then accelerate a bit , then let off, then pull clutch in and rev quite high, let clutch out, and is should in power band there so you should wheelie nicely. keep your foot close to back brake to bring front end down though. you could always putyour foot in the grab bar, stand up and in 1st gear rev, pull on bars and just wheelie like that.............
 
Reply
Old Feb 27, 2006 | 02:43 AM
  #6  
taob's Avatar
Trailblazer
Joined: Feb 2006
Posts: 39
Likes: 0
Default Banshee Wheelie

take it up to 3rd gear and then go about 4-5000 rpm with the clutch out and then let off and hit the throtle quick and it will come up fairly slow and then just practice thumb control Always keep your foot above the rear brake lever just in case you need it I used to do this all the time I could ride a wheelie for about 2 blocks But on my old honda I could ride one from town to town LOL the honda is much better for this
 
Reply
Old Feb 28, 2006 | 02:35 PM
  #7  
wayfastwhitey's Avatar
Weekend Warrior
Joined: Feb 2006
Posts: 20
Likes: 0
Default Banshee Wheelie

on my banshee i found that if u are in 1st ease it out just anough to get it rollin pull in the clutchturn her up a lil then dump the clutch and ride her out through the gears
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kaleb_00
Performance Mods and Project Quads
2
Jun 1, 2016 09:15 AM
greek271
Yamaha
2
Aug 8, 2015 08:16 PM
black_thunder
ATV Videos
0
Jul 26, 2015 09:23 PM
Dirtbikemike1
General Chat
1
Jul 11, 2015 03:36 PM
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
Jul 7, 2015 11:00 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 03:15 AM.