Sport Quads Discussions on sport quads.

Air lid, what is best for performance?

Thread Tools
 
Search this Thread
 
Old Aug 16, 2006 | 12:41 AM
  #1  
Tripleshot's Avatar
Thread Starter
|
Trailblazer
Joined: May 2006
Posts: 78
Likes: 0
Default Air lid, what is best for performance?

I just received my pro design K&N filter kit for my 700R Raptor. I have ordered Power Commander controller and Curtis Sparks full exhaust. I run the dunes. I want a lid to replace the stock snorkel lid. Who makes one?[img]i/expressions/face-icon-small-confused.gif[/img]
 
Reply
Old Aug 16, 2006 | 02:39 AM
  #2  
reconranger's Avatar
Red Rider
Honda, accept nothing less!
Joined: Dec 2002
Posts: 12,733
Likes: 1
Default Air lid, what is best for performance?

http://www.ehsracing.com/
 
Reply
Old Aug 17, 2006 | 12:00 AM
  #3  
Tripleshot's Avatar
Thread Starter
|
Trailblazer
Joined: May 2006
Posts: 78
Likes: 0
Default Air lid, what is best for performance?

I do not want to modify my cover. I want a replacement . I think there is one that does not have the snorkel intake tube. I just can't find it. Someone here has a pic of his on a raptor, but I can't remember who.[img]i/expressions/face-icon-small-sad.gif[/img]
 
Reply
Old Aug 17, 2006 | 09:58 PM
  #4  
reconranger's Avatar
Red Rider
Honda, accept nothing less!
Joined: Dec 2002
Posts: 12,733
Likes: 1
Default Air lid, what is best for performance?

You did say LID. Is your snorkle in the lid on that quad?

The EHS is a replacement lid (or you can cut the hole youself and save a few bucks if you like).

K&N makes a cover for some quads.
 
Reply
Old Aug 17, 2006 | 10:10 PM
  #5  
bberck's Avatar
Pro Rider
Joined: Mar 2005
Posts: 958
Likes: 0
Default Air lid, what is best for performance?

I run a Pro-tec lid on mine (have a pic in my pictures) I like it alot. It didnt really seal as tight as I would like but I added a little weather stripping to the bottom, so for $2 more it fits on tight now. [img]i/expressions/face-icon-small-happy.gif[/img]

I rode about 4 good times in very dusty conditions before I cleaned my filter this time and it still was barely dirty. [img]i/expressions/face-icon-small-cool.gif[/img]
 
Reply
Old Aug 17, 2006 | 11:05 PM
  #6  
Tripleshot's Avatar
Thread Starter
|
Trailblazer
Joined: May 2006
Posts: 78
Likes: 0
Default Air lid, what is best for performance?

Originally posted by: bberck
I run a Pro-tec lid on mine (have a pic in my pictures) I like it alot. It didnt really seal as tight as I would like but I added a little weather stripping to the bottom, so for $2 more it fits on tight now. [img]i/expressions/face-icon-small-happy.gif[/img]

I rode about 4 good times in very dusty conditions before I cleaned my filter this time and it still was barely dirty. [img]i/expressions/face-icon-small-cool.gif[/img]
You da man. I went back to see the threads I viewed, and found yours. It is the one that got my attention. $85 is a bit steep for a lid, but that is probably the one I'll use. Do you know where I could get one a little cheaper? BTW, You have a nice machine. Mine is white and I'll post pics after I'm done. I have a bunch to show. I'm going to Sand Mountain in Utah labor day to try the new set up.

 
Reply
Old Aug 17, 2006 | 11:13 PM
  #7  
bberck's Avatar
Pro Rider
Joined: Mar 2005
Posts: 958
Likes: 0
Default Air lid, what is best for performance?

Got mine from rocky moutain atv for around $75. I got something else to get total over $100 for the free shipping. [img]i/expressions/face-icon-small-smile.gif[/img]

You will like the added power it really wakes it up. [img]i/expressions/face-icon-small-happy.gif[/img]
 
Reply
Old Aug 18, 2006 | 12:12 AM
  #8  
Tripleshot's Avatar
Thread Starter
|
Trailblazer
Joined: May 2006
Posts: 78
Likes: 0
Default Air lid, what is best for performance?

Originally posted by: bberck
Got mine from rocky moutain atv for around $75. I got something else to get total over $100 for the free shipping. [img]i/expressions/face-icon-small-smile.gif[/img]

You will like the added power it really wakes it up. [img]i/expressions/face-icon-small-happy.gif[/img]
Price went up. $80.95 now. Maybe the fixed the seal properties. To get the free shipping, I bought some shock socks. A little cosmetic treatment will do good on it.[img]i/expressions/face-icon-small-wink.gif[/img]
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Valder
Suzuki
4
Nov 28, 2020 07:38 AM
Customer Service #1
Arctic Cat
73
May 15, 2020 08:46 AM
ATVC Correspondent
Drivetrain, Suspension & Tires
2
Sep 30, 2015 01:37 AM
jankerstien
Kawasaki
1
Sep 21, 2015 03:09 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 05:08 AM.