hi folks,

I got some misc questions while looking over my newly arrived JetMoto 110.

1. There is a long thin hose coming out of the left side of the intake which runs down along the frame towards the left side of the engine cover. The end of this hose is NOT connected. What is this for? should it be connected to something? I am not talking about the hose which attaches to the fuel filter.

2. After attaching the rear brake light, I am left with two unattach connectors. One is a "L" shaped connector and the other is a three pin connector. Any one know what these are for? remote wireless kill switch? running lights, turn signals? lol


-AF

 

1) Sounds like the carb drain hose.
2) Probably option parts that your model doesn't need. Jetmoto seems to use a generic electronics setup. I have several connectors on my 250 sport that aren't on anything.

-JNY

 

here are some photos to be more specific. Is this the carb drain you were thinking???
Its running vertically in the center of this photo and end up below the cylinder



Here are the two unconnected electrical connectors at the rear of the ATV... One is a 2 pin the other is a funny shaped "ELL".

 

first one looks like a carb drain to me. unscrew that screw on the side and the gas should come out. Contact John or Eugene about the extra plugs. I'm sure they are option parts for another quad.

-JNY

 

thanks JNY for comfirming the carb drain.

John,
got anything to sell me to plug into those optional rear electrical connecters? a wireless remote engine cut off would be nice.. ;-)