I cracked the stock head on my banshee so it has radiour fluid leaking in 2 the motor and out the spark plug holes i have a cool head on order 2 replace it I need 2 know 2 things does it use the stock headgasket or o rings and what do I torqe the new head down with also is their a pattern.

 

The cool head comes with o-rings.

There probably is a pattern in the manual along with torque specs.

 

I was looking around the net I didnt find a patter but I found torqe specs first time is 18 ft/lbs then 20ft/lbs I should b getting the head later 2day